Product Overview
Brand New/Never Used/Original Packaging
TET-FET32GT Third Eye Technology FETtroller32 GT Controller (NO E-CHOKE)
- Fully Electronic Controller with 3rd Eye’s Exclusively Designed “All FET Design” Motor Drive “FETDrive” and Brakes “FETBrakes”
- “Designed right, the 3rd Eye way” with all the Features you will need and many that other Controllers don’t offer
- Built-In Cooling Fan, Self-resetting Power Protection (no fuses required!)
- Far superior to the standard controllers supplied in sets. There are 2 adjustable knobs on the controller for fine sensitivity adjustment, and brake.
- Commercial grade controllers will stand a lot more abuse than the standard controllers that come with 22 gauge wire and have a tendency to break down.
- These controllers have brakes built-in as long as your track is wired to use brakes.
Standard Feature/Benefit
- 22nd Century Fully Electronic High Technology Linear Design - specifically designed for 1:32 Racers
- All “Mosfet Powered Design” - featuring 3rd Eye’s Exclusive “FETDrive” Motor Drive and “FETBrakes”.
- “Differential Amplifier Technology” - power control uses the test of time proven design.
- “No Power Blast Relay” - full-on power is done electronically; the “FETDrive” has less resistance to the power supply/battery and a faster response than a conventional Power Blast Relay.
- “More Usable Throttle Range” – now with 20 more usable bands near maximum throttle where a Power Blast Relay would jump 1-2 V directly to the power supply/battery.
- 3rd Eye’s exclusive “FETBrakes” - braking (stops the car on a dime and gives 9 cents change); stops car even after the track power goes off.
- No fuses to replace - uses “PTC” fuses for “Mistake Proof” reverse polarity protection.
- “Infinitely Adjustable Brake and Sensitivity controls” - (0-Max) control from onset to full.
- “Sensitivity Control Voltage Goes to .5V - ¾ Throttle” - provides maximum control for all 1:32 cars.
- “Selectable Throttle Curve” – four (4) settings for “Improved Throttle Response” and softer bottom end throttle response.
- “Track Mounting Bracket” - power Assembly sets firmly and securely on the track.
- “Heat Sinking” and “Built In Fan” - provide safe, reliable cooling.
- “Lightweight Handle” - with easy-to-use controls located at the top and sides.
- “Smooth trigger action/Continuously Variable Throttle Control” - (no steps) 150 bands.
- “No Trigger Dead Band” - no trigger travel from brake to power = faster lap times.
- Attractive “Professional looking Styling” - with Parma handle and Trigger
- High intensity “Blue Power LED Indicator” - located in the handle.
- 12” Long 12 gauge “high flexibility power leads” – for maximum power and easy hookups.
