Product Overview
Brand New/Never Used/Original Packaging
SCCTGT-SM Slot Car Corner Small Tire Gluing Tool 1:32 Slot Car Part
Let’s face it – gluing slot car tires is a tedious and often messy task. Depending on the method you use, it’s difficult to ensure the adhesive is spread uniformly across the entire surface where the outer surface of the wheel and inner surface of the tire meet. The result is an inconsistent bond that is prone to failure under actual race conditions.
The SCC Tire Gluing Tool takes a different approach to gluing tires. With the SCC Tire Gluing Tool, adhesive is applied uniformly across the entire surface of the wheel. You can easily see and check to coverage to ensure there are no bare spots. The tool is designed to stretch a tire slightly so it can be “dropped” onto the wheel. No more toothpicks or trying to slide the tire across the wheel (and pushing the adhesive off the wheel as you do so). You get consistent results with better adhesion which yields better performance under race conditions.
The SCC Tire Gluing Tool is available in two (2) sizes:
Small – designed for 14mm through 16.00mm wheels (including all popular 15.8mm wheels This is the product you are currently viewing.
Large – designed for 16.0mm through 17.5mm wheels (including all popular 17.3mm wheels).
What's included:
- Tire Gluing Tool
- Fender Washer
- Axle stop with M2 set screw
What you'll also need:
- A 54mm (or longer) 3/32" axle
- A .035" (0.9mm) hex driver
- Wheels and tires (of course!)
- Tire adhesive of your choice
- The SCC Tire Gluing Tool works with wheels with or without a center rib.
