Product Overview
Brand New/Never Used/Original Packaging
RM-02010 Slot Car Corner Track Call Button - Panel Mount (White)
These are arcade quality track call buttons perfect for panel mounting applications. Mounting hole diameter is 1-1/8". The mounting stem is long enough to mount in surfaces up to 3/4" thick. Includes a top-of-the-line "Cherry" brand switch and retaining nut. Colors available include red, white, blue, black and yellow.
Track call buttons are typically used in conjunction with a computer based race management system (e.g. PC LapCounter, Trakmate). The track call button includes a small momentary switch - when the button is depressed, the switch "momentarily" closes a circuit which signals the race management system to do several things simultaneously:
- Open a relay which prevent power from flowing to the track.
- Stop lap counting
- Stop lap timing
When the button is pressed again, power once again flows to the track and lap counting/timing resumes.
Tip: Because of the large hole required, it is often difficult to include a track call button on the controller hookup panel. However, the track call button can often be mounted immediately adjacent to the controller hookup panel in the wood surface the panel is mounted to.
Note: These track call buttons have a horizontal switch orientation which works very well for driver's stations. However, we do not recommend this button/switch for handheld track call buttons where the button/switch will be mounted inside a tube (it can be done; however, you will need to use an oversize tube). These handheld track call buttons (prefabricated or kit) include a special button with a vertical switch orientation.
