Product Overview
Brand New/Never Used/Original Packaging
FS88797 Frankenslot FS Speedflow Wireless Eco Wave V3.17 for Carrera Digital - Black 1:32 Slot Car Controller
Frankenslot WIRELESS Trigger Controller for Carrera Digital 124/132. Now you can have a wireless trigger controller for Carrera's D132 / 124 System!
Technical data:
- Run-time continuous Operation - about 84 hours with 2 x AAA Duracell industrial
- Survival in the standby - Approximately nine months
- Power consumption when OFF - Real power separation. No consumption
- Power consumption in standby mode - about 200 uA
- Power consumption while operational - Approximately 16 mA
Operating Instructions:
- 1) Set the channel and connect with the wireless receiver, 10112 (not included).
- 2) Switch the controller off, select a channel, and hold the switch button on the controller during power-up.
- 3) The receiver will acknowledge the programming with the "7-segment flashing run."
- 4) The controller is ready to race!
Configuration Mode:
With the controller connected to the receiver, switch the controller off. Regulate gas completely by holding the "Hold" switch button and then turn on the controller. The LED will go on. Let go of the switch button and trigger the configuration will begin. The configuration is done based on the SpeedFlow box programming
The selection of the desired configuration value is done by briefly pressing the switch button. Storing the value selected is carried out by the LED hold acknowledged storing the Lanechange button, to a rapid flash. After that, the next configuration option is indicated by flashing. The following configuration options are available.
Number of Speed Levels:
- 1 x Flash - Original Carrera 16 speeds
- 3 x Flash - Speedflow regulation (30 speeds)
- 4 x Flash - Speedflow regulation (44 speeds)