Product Overview
Brand New/Never Used/Original Crystal Display
20576 Carrera High Banked Curve 3/30° (6 Pieces) 1:24 Slot Car Track
Steep into the corner
With this steep corner you will give your race track new momentum – in the truest sense of the word. Thanks to the raised construction, the slot cars can drive through the corner at a higher speed than in a flat corner. So you don't have to brake so hard in exciting races and can take the momentum through the corner to the next section. The set consists of six track parts, each with an angle of 30°. When assembled, this results in a long 180° corner, which racers then have to drive through. The supports needed to hold up the track are also included in the set. The track section is also suitable for the 6-lane extension of your race track. The steep corner comes on a scale of 1:24 and can therefore be mounted on race tracks with the same scale: Carrera DIGITAL 124, Carrera DIGITAL 132, Carrera EVOLUTION.
- Will fit directly outside of a 2/30 high bank curve. Can be used on a 2, 4, 6 or 8 lane track.
Contents:
- 6 - 3/30 curves (6 pieces make a 180 curve)
- Track connection clips
- High bank supports
-----
- Radius of Inside edge of track 23.62 in (60 cm)
- Radius of Outside edge of track 31.50 in (80 cm)
- Outside diameter of curve track 63 in (160 cm)
-----
Can be used with the following systems :
- Evolution 1/32
- Digital 132/124
