null

10111 Carrera Digital 124/132 Wireless 2.4 GHz Single Controller for 1:24 Slot Car Track

Carrera

$53.95
10111 Carrera Digital 124/132 Wireless 2.4 GHz Single Controller for 1:24 Slot Car Track
SKU:
10111
UPC:
4007486101111
Adding to cart… The item has been added

Product Overview

Brand New/Never Used/Original Packaging

Digital 132 Wireless 2.4 GHz Single Controller

*** Comes with 1 green and 1 blue button ***

This controller requires a charging station (10114) and receiver (10112) to function. These accessories can be purchased as a set with either the 2.4 GHz Duo Set (10109) or the 2.4 GHz Single set (10110).

If adding to a digital set that already has 2.4 GHz controllers, additional chargers/receivers are not necessary as 1 receiver will control up to 6 - 2.4 GHz Controllers.

Contents:

  • 1 2.4 GHz WIRELESS+ Speed controller
  • 1 Replacement button
  • Lithium-polymer battery
  • Instructions

These accessories fit to the following systems:

  • Carrera DIGITAL 132
  • Carrera DIGITAL 124

-------

Coding instructions for 2.4 GHz controllers with the 30352 Control Unit:
Please make sure there is only 1 wireless receiver plugged into your track. This receiver should be plugged in to either the 1st or 2nd tower on your control unit.

Step 1-

  1. Take all the cars off of the track
  2. Take controller 1 and hit the set button on the receiver; when you see the #1, press the black button on top of your controller
  3. Take car 1 and put it on the track.
  4. Press the code button once, and then press the trigger on your controller. Car 1 should now be coded to controller 1.

Step 2-

  1. Take car 1 off the track
  2. Take controller 2 and hit the set button twice on the receiver; when you see the #2, press the black button on top of your controller.
  3. Take car 2 and put it on the track.
  4. Press the code button once, and then press the trigger on your controller. Car 2 should now be coded to controller 2.

Step 3 -

  1. Take car 2 off the track
  2. Take controller 3 and hit the set button twice on the receiver; when you see the #3, press the black button on top of your controller.
  3. Take car 3 and put it on the track.
  4. Press the code button once, and then press the trigger on your controller. Car 3 should now be coded to controller 3.
  5. Follow the same steps for the remaining cars/controllers.
  6. You will not need to do this before every race; each car will stay coded to its controller. You should now be set to race