Product Overview
Brand New/Never Used/Original Packaging
-
Dallara DP Daytona prototype from the 24 hours of Daytona in 2010.
-
Has the 1mm offset drop pod with special hypoid offset gear as well as the Slot.it high performance balanced 21,500 rpm, high torque 170 g/cm motor which was developed to go head to head with the NSR shark motor. This motor has almost 40% more power than the stock 25,000 rpm 105 c/gm motor found in earlier Slot.it cars. Racer then used Slot.it's large hub wheels on this car in place of the small hub wheels found on many other cars to increase acceleration and top speed.
-
Tempered rear axle
-
New high performance offset crown gear with brass pinion on the motor shaft
-
Large hub aluminum 16.5mm wheels with set screws in the rear
-
One neodymium magnet
-
Brass axle bushings for the rear axle.
-
Silver tinned competition braid.
-
Allen wrench for the wheels and gear are included under the base.
-
Adjustable front axle height, which can be adjusted using the supplied allen wrench, makes this different from other Slot.it cars made to date.
-
There are over $35.00 in high performance parts in this car alone.
-
Able to accept the new angle winder pod with the long can high torque motors.
-
Red and black in color with Ford, Sunoco, McDonalds and Sun Trust sponsors #77.
